System File Colours
Not really a problem but when system files are posted on the forum, many are in colour. Mine are all in B&W is there a reason for this?
Duet 2 WiFi, DWC and firmware 3.2 RC2
@jmshep this was as part of a change to RC2 due to issues with the mobile version.
It's been raised here https://forum.duet3d.com/topic/20562/dwc-3-2rc2-files-display
But I had this problem before I updated to 3.2 RC2. Is there a setting to allow file listing to be in colour after the apparent problem is fixed?
@jmshep no. Its either activated in DWC or its not.
What version was it not working on before?
It has not worked on any previous versions, the one installed before 3.2 was 3.1.1
@jmshep it wasn't a feature of 3.1.1
It's only come in as part of 3.2 and at the moment, it's broken.
engikeneer last edited by
@jmshep DWC displays you config, homing, macro etc files in a basic text editor in your browser. Here's a screenshot of mine (using 'dark mode' in RRF 3.1.1):
When people post their code on the forum, then generally use the 'Code Snippet' tool in their posts. This one:
This is is what makes their code coloured/highlighted and pretty (and a lot easier to scroll through!):
; Configuration file for Duet WiFi (firmware version 3) ; executed by the firmware on start-up ; ; generated by RepRapFirmware Configuration Tool v3.1.10 on Fri Dec 04 2020 18:18:23 GMT+0000 (Greenwich Mean Time) ; General preferences G90 ; send absolute coordinates... M83 ; ...but relative extruder moves M550 P"Thor" ; set printer name M665 R105.6 L200 B85 H320 ; Set delta radius, diagonal rod length, printable radius and homed height M666 X0 Y0 Z0 ; put your endstop adjustments here, or let auto calibration find them ; Network M552 S1 ; enable network M586 P0 S1 ; enable HTTP M586 P1 S0 ; disable FTP M586 P2 S0 ; disable Telnet ; Drives M569 P0 S1 ; physical drive 0 goes forwards M569 P1 S1 ; physical drive 1 goes forwards M569 P2 S1 ; physical drive 2 goes forwards M569 P3 S1 ; physical drive 3 goes forwards M584 X0 Y1 Z2 E3 ; set drive mapping M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation M92 X160.00 Y160.00 Z160.00 E192 ; set steps per mm M566 X1200.00 Y1200.00 Z1200.00 E2000.00 ; set maximum instantaneous speed changes (mm/min) M203 X18000.00 Y18000.00 Z18000.00 E4000.00 ; set maximum speeds (mm/min) M201 X4000.00 Y4000.00 Z4000.00 E1500.00 ; set accelerations (mm/s^2) M906 X1400 Y1400 Z1400 E1400 I30 ; set motor currents (mA) and motor idle factor in per cent
Thank you both for your replies.
If understand correctly, the colour display has been disabled in DWC for touch devices (which I don't have).
The description of the 'Code Snippet' tool explains why I don't see my normal file listings in colour on my PC monitor
and I am not missing out on a feature.
@jmshep the colour display in DWC is broken not disabled.
Just upgraded from 3.2RC to 3.2 and file listings are now in colour.