Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Creality CR-10 upgrade

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    14
    252
    53.3k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • dc42undefined
      dc42 administrators
      last edited by

      Did you send M997 S0:1 from DWC or from Pronterface?

      From Pronterface, you can send M997 S1 and M997 S0 separately.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      1 Reply Last reply Reply Quote 0
      • Agniusmundefined
        Agniusm
        last edited by

        Sending M997 S1 returns:
        >>>M997 S1
        SENDING:M997 S1
        Invalid module number '1'

        Sending M997 S0 returns:
        >>>M997 S0
        SENDING:M997 S0
        Error: Firmware binary "DuetEthernetFirmware.bin" not found
        [ERROR] Error: Firmware binary "DuetEthernetFirmware.bin" not found

        Maybe i am skipping some crucial steps? Working on win10 64bit.
        I have not installed any drivers for the duetWifi

        1 Reply Last reply Reply Quote 0
        • dc42undefined
          dc42 administrators
          last edited by

          Somehow you have installed DuetEthernetFirmware on your Duet WiFi. Is it definitely the Duet WiFi that you have - the board that has the WiFi module soldered on near on corner, with the antenna part overhanging the edge of the board? Or is it a Duet Ethernet, with a daughter board that carries the Ethernet socket?

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          1 Reply Last reply Reply Quote 0
          • Agniusmundefined
            Agniusm
            last edited by

            Its deff wifi, i had it connected to my network 😄
            I have not installed it yet, i just got the board today and read that it is advisable to upgrade to the newest firmware so i tried 🙂
            Got the files from here: https://github.com/dc42/RepRapFirmware/releases
            and i did dowload this file: DuetWiFiServer-1.19.bin

            1 Reply Last reply Reply Quote 0
            • Agniusmundefined
              Agniusm
              last edited by

              How about if I rename duet WiFi to duet Ethernet and flash it then flash wifi module?

              1 Reply Last reply Reply Quote 0
              • dc42undefined
                dc42 administrators
                last edited by

                If you run M115 i think you will find that it reports itself as a Duet Ethernet, because somehow it is running DuetEthernetFirmware.

                What you need to do now is download DuetWiFiFirmware-1.19.bin to /sys on the SD card. But then rename it to DuetEthernetFirmware.bin. Then you will be able to run M997 S0 to install it. When it has finished installing and rebooted after about a minute, you should be able to run M997 S1 to install the new WiFi firmware.

                Edit: your post crossed with mine.

                Duet WiFi hardware designer and firmware engineer
                Please do not ask me for Duet support via PM or email, use the forum
                http://www.escher3d.com, https://miscsolutions.wordpress.com

                1 Reply Last reply Reply Quote 0
                • Agniusmundefined
                  Agniusm
                  last edited by

                  This error comes up:
                  SENDING:M997 S0
                  [ERROR] Can't read from printer (disconnected?) (SerialException): call to ClearCommError failed

                  1 Reply Last reply Reply Quote 0
                  • Agniusmundefined
                    Agniusm
                    last edited by

                    Erased all then used SAM-BA to load wifi firmware and then M997 S0:1 worked. All upgraded.

                    P.S. I was wandering if there is Ad-hoc functionality? Or is there a way to avoid using router and connecting strait to duetwifi from tablet?

                    1 Reply Last reply Reply Quote 0
                    • dc42undefined
                      dc42 administrators
                      last edited by

                      @Agniusm:

                      This error comes up:
                      SENDING:M997 S0
                      [ERROR] Can't read from printer (disconnected?) (SerialException): call to ClearCommError failed

                      That's normal. The USB port is closed while the firmware is updated. You can reconnect about a minute later when the firmware update has completed.

                      Access point mode isn't working on the WiFi module with the current firmware.

                      Duet WiFi hardware designer and firmware engineer
                      Please do not ask me for Duet support via PM or email, use the forum
                      http://www.escher3d.com, https://miscsolutions.wordpress.com

                      1 Reply Last reply Reply Quote 0
                      • Agniusmundefined
                        Agniusm
                        last edited by

                        I have made PanelDue 5" enclosure. Its fully enclosed to be mounted on 2020 extrusion with quick release(sort off). USB is inaccessible but easy altered: https://www.thingiverse.com/thing:2495311

                        1 Reply Last reply Reply Quote 0
                        • Agniusmundefined
                          Agniusm
                          last edited by

                          Doing this extruder assembly and was wandering what is recommended distance from extruder to avoid heat damage?

                          1 Reply Last reply Reply Quote 0
                          • number40fanundefined
                            number40fan
                            last edited by

                            My IR probe is about 5mm from the heat block, but I do have Kapton tape wrapped around the hotend as well as the back side of the probe. No issues.

                            1 Reply Last reply Reply Quote 0
                            • Agniusmundefined
                              Agniusm
                              last edited by

                              thanks. mine probably be with e3d sock.

                              1 Reply Last reply Reply Quote 0
                              • dc42undefined
                                dc42 administrators
                                last edited by

                                5mm is plenty, but put 2 layers of Kapton tape on the back as recommended in the fitting instructions, in case the heater block rotates, to prevent the back of the sensor board shorting against it.

                                Duet WiFi hardware designer and firmware engineer
                                Please do not ask me for Duet support via PM or email, use the forum
                                http://www.escher3d.com, https://miscsolutions.wordpress.com

                                1 Reply Last reply Reply Quote 0
                                • number40fanundefined
                                  number40fan
                                  last edited by

                                  I was scared and put 5 layers!

                                  1 Reply Last reply Reply Quote 0
                                  • Agniusmundefined
                                    Agniusm
                                    last edited by

                                    Thanks. I turned the probe around so all the components are on the cool side. I'll put some caption on it, good advice.

                                    1 Reply Last reply Reply Quote 0
                                    • Agniusmundefined
                                      Agniusm
                                      last edited by

                                      I just started wiring. I got some stranded 24awg utp cable. Would that be suficient for the motors? It is very convenient with 8 conductors inside:)

                                      1 Reply Last reply Reply Quote 0
                                      • dc42undefined
                                        dc42 administrators
                                        last edited by

                                        24awg should be OK for up to 2A motor current, but not much more.

                                        Duet WiFi hardware designer and firmware engineer
                                        Please do not ask me for Duet support via PM or email, use the forum
                                        http://www.escher3d.com, https://miscsolutions.wordpress.com

                                        1 Reply Last reply Reply Quote 0
                                        • Agniusmundefined
                                          Agniusm
                                          last edited by

                                          Ok thanks. Here is some uodate on the setup. Sketched up duet wifi enclosure. Its simple but functional. Changed panel due mout to the side and angle from 60 degrees to 36ish. Done most of the cabling, here are the photos:

                                          1 Reply Last reply Reply Quote 0
                                          • Agniusmundefined
                                            Agniusm
                                            last edited by

                                            Have a question on the bed. As i will use IR bed probe and have dual Z, should i mount my heat bed rigid or should i leave springs, old setup? It is a large bed (410x410) and four mounting points don't add to bed flatness. I am thinking of drilling two holes in the middle (same as Prusa i3 mk2) and mounting it on rigid standoffs. I will not use glass then and glue PEI sheet strait to aluminium heat bed. I will probably win some heating time.
                                            Thank you

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA