Duet 3 Mini 5+ connections problems
-
Hi.
I got a new Duet 3 Mini 5+.
i cant get it to make connection to my pc so that i can configurate it.i have tried 4 computers
6 usb cabel.
when i put the usb cabel in the duet the 3v and 5v led light near reset button / power usb up but nothing happens in device management
it wont show up in device manager.
i have followed
https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7can you help me ?
-
when you plug the board in with the USB cable to a PC, try double clicking the reset button. you will see the diag light change to slow pulsing. The board should show up as a storage device. this will show if the USB cable/port is working or not.
-
hi.
Nothing happens when i press the reset button ?
tried 4 cables and 3 usb portsgreetings
tommy -
@dk_tommyt You must press it twice in short succession, then the diag LED will start pulsing.
-
hi.
Nothing happens when i double clicking the reset button
i have presst it twice meany times and nothing happensgrettings
tommy -
Can you go through this?
https://duet3d.dozuki.com/Wiki/What_to_do_if_your_Duet_won't_respondWhat LEDs light up on the board when connected to USB?
-
@dk_tommyt is the diag light on at all when powered over USB?
-
Hi.
i got a video of what happens on power on and when i press the reset buttongrettings
tommy -
Can you try with the SD card removed?
It was hard to see in the video which LEDs exactly are lit.
-
@Phaedrux
https://youtu.be/k5vH9-jUoQ0it is the same whiteout sdcard.
it is 3v and 5v -
Please contact your vendor and initiate a warranty exchange. Include a link to this thread as authorization.
-
hi.
will do.
thanks for the help.
grettingstommy