Duet3D Logo

    Duet3D
    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Duet WiFi 2 EXP Thermistor Usage

    Duet Hardware and wiring
    2
    3
    79
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Sphyloid
      Sphyloid last edited by

      Is a 4.7k ohm 0.1% 0.25w pullup resistor to ADVREF sufficient? Or do I need an additional 10k resistor on the Thermistor side?

      Sorry for not being able to follow the existing documentation. The pin numbers on the 50P are matched. Relevant pins are highlighted.

      ADVREF4700pullup.PNG

      ZipZap 1 Reply Last reply Reply Quote 0
      • ZipZap
        ZipZap @Sphyloid last edited by ZipZap

        @sphyloid

        4K7 between ADVREF and thermistor input and the thermistor between thermistor input and VSSA. The thermistor IS the resistor on the thermistor side.
        Your schematic seems correct.

        /Julien

        Most important guide -> Triffid Hunter's Calibration Guide
        HyperCube EVO (derivate) in 250x250x300 - enclosed for ABS - Duet2WiFi - custom watercooling

        Sphyloid 1 Reply Last reply Reply Quote 0
        • Sphyloid
          Sphyloid @ZipZap last edited by

          @zipzap Thank you!

          1 Reply Last reply Reply Quote 0
          • Referenced by  code7 code7 
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA