BLTouch won`t home

Chrabban

it is a bit strange i know.

yea i know, i havent fixed that one, it sits in front of the hotend, i will put in the right numbers later

DIY-O-Sphere

@chrabban said in BLTouch won`t home:

sorry for the late awnser, sick kids has taken almost all of my time.
well it just homes y and x then goes to the center and goes of into space it dosent do anything els

Is the probe deployed? Does it stop moving if you hit the pin?

Phaedrux

If you send G92 Z10 to force it into a homed position so you can jog the axis, does it move the correct direction? -z moving the print head and bed closer? +z moving them farther away.

If it's moving in the wrong direction you'll have to change the direction of rotation in the M569 command for the z driver.

That could explain why a G30 would move it in the wrong direction.