Over extrusion at corners
mendelevium last edited by
I have noticed my prints have excess extrusion at the corners of things. Does that have to do with the slicer or the pressure advance in the config settings
engikeneer last edited by engikeneer
@mendelevium pressure advance, speed, jerk, accel, temperature, any coast settings in your slicer, any mechanical issues in your printer etc all play a part.
If you haven't got any pressure advance enabled, then I would definitely start tuning it!
Edit: https://duet3d.dozuki.com/Wiki/Pressure_advance, sorry copied the wrong link!