M291 messages are not always displayed in macros

[dc42]

M292 codes should not be used in scripts, except in exceptional circumstances such as emergencies, where you might want to dismiss a dialogue that hasn't been acknowledged so that you can display a new message.

[chrishamm]

@dc42 @mfs12 I will take a look at this next week, IMO M292 should be able to dismiss non-blocking messages from macro files, especially because that's already supported by DWC.

[flobler]

I am seeing similar issues, which I described here: https://forum.duet3d.com/topic/22667/m291-messages-ignored-by-paneldue/17?_=1626901114508

[mfs12]

@Aitor this issue should be solved with release paneldue-3.4.0-pre1.

I mark this issue as solved now. If you are still experiencing problems as described here either re-open this thread or start a new thread.

https://forum.duet3d.com/topic/24889/paneldue-3-4-0-pre1-released/6