Toolboard 1.1 IO pins voltage tolerance
jMaddrell last edited by jMaddrell
Can somebody confirm what voltage the io0.in pins will tolerate on the toolboard 1.1? For the mb6hc the wiki says io0-io8 will take 30v but I can't see anything on the toolboards documentation.
I'm planning on using a 24v inductive probe connected to the same power supply as the toolboard and the probes output to io0.in if it's safe.
Yes they are 30v tolerant, except for IO1_IN, which is limited to 15V.
jMaddrell last edited by
@phaedrux thanks much appreciated