Duet 3 Mini 5+ for a Voron V2.4?
-
@zapta This is my solution with the Galileo variant of the clockwork extruder
Voron V2.434 / Duet 3 Mini5+, Duet 3 Expansion Mini 2+, Duet 1LC V1.1 Toolboard
Voron V0.250 / Duet 2 Maestro -
My Voron V2.4 is working now with a Mini5+2 WiFi, RRF, no SBC and the Mini5 seems to be a very good fit. Coming from Duet2, it has nice touches such as 30 tolerance (for an Omron probe), external antenna, 12V DC/DC for fans, Neo Pixels outputs, small footprint for 7 drivers configuration, and more.
My only complains is the add on +2 drivers board hanging below the main board with. I would prefer to have a single board with 7 drivers.
-
@pixelpieper or anybody else, is there anywhere I can download these files for the 1.1v mount?
#edit. Found semi-hidden in Github! https://github.com/christophmuellerorg/VoronUsers/tree/afterburner_1LC/printer_mods/christophmueller/Voron2-Gallileo-Afterburner-Duet-1LC
Thanks Jim
-
After using a Voron 2.4 with a stand alone Duet Mini5+2, I am in the opinion that's an excellent fit. Just saying.
-
@zapta thanks for confirming this!
