My eagle 🦅 has...

[CNCModeller]

Re: My eagle has landed...

Hi All, thought an update was in order, my eagle print is ready to roll. Have a look here if you're interested!

https://youtu.be/j4rwMDxzSJs

)

[T3P3Tony]

@cncmodeller awesome!

This is a boss mode image:

Cool to see your polar printer in action. Also like the "it's quite large" comment.

[CNCModeller]

Thanks @t3p3tony , the printer is definitely getting there!

[o_lampe]

Looks very promising!
I hope your airfield has a long start track and you don't have to start on grass? From the looks it'll need good speed before you can take off? On some of my faster planes I had to use a 3-blade propeller, because the ground clearance was too low for a decent bigger prop.
Can't wait for the lift off video