I could use some help
-
-
@droftarts kids need their Dad, I had 3 (they're all adults now, although the oldest is living with us currently). Thank you for being so helpful Ian!
-
@fcwilt are we okay even though the code still says "forwards?"
-
@mac said in I could use some help:
@fcwilt are we okay even though the code still says "forwards?"
Everything after the ; character is just a comment - it affects nothing - you could put a line from a Shakespeare play there and it would make no difference at all.
All that matters is you find the right S parameter so the Z axis moves in the correct direction.
And the same is true for X and Y - if it turns out they are not moving in the correct direction.
Frederick
Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6
-
@droftarts said in I could use some help:
@fcwilt look at his bed. It’s not 10mm cast aluminium plate, well-constrained and moving on linear rails. It’s a (please forgive me, @Mac ) cheap bedslinger setup. He’s going to need mesh compensation to have half a chance getting the first layer to stick. The probe was working fine. Fiddling around with a Z min endstop is excruciating with flimsy beds.
Doing kids bath and bed. Not around for a while.
Ian
Rest assured Mesh Bed Compensation will be implemented.
One small step at a time.
Frederick
Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6
-
@fcwilt got it, I've offended you. Please accept my apologies. I've spent 70 years making life miserable for others. It's hard to get out of that habit.
-
@fcwilt I'm not opposed to buying a decent bed. Given that the one I have on this printer now has failed the PID tests horribly, I'm looking for a good bed. Any recommendations you can provide (preferably links that will make you some money), would be appreciated.
-
@mac said in I could use some help:
@fcwilt got it, I've offended you. Please accept my apologies. I've spent 70 years making life miserable for others. It's hard to get out of that habit.
I'm not offended at all.
I'm glad we are making progress.
I hope we can get Z working.
If we can do that, I think you can get X and Y working on your own since the issues are the same and the homing code is pretty much the same, just specifying a different axis.
I am running out of time today though.
Frederick
Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6
-
@fcwilt My BLV rebuild of my old Anet A8 had linear rails. Marvelous kit, those. I still have them, and putting them on this POS seems possible with a little elbow grease and a drill press (both of which I have).
-
@fcwilt got it, ship me the X and Y code please. I'll test Z right now to confirm that the changes accomplished what I may have to use to correct X and Y if they aren't up to snuff.
-
@mac said in I could use some help:
@fcwilt I'm not opposed to buying a decent bed. Given that the one I have on this printer now has failed the PID tests horribly, I'm looking for a good bed. Any recommendations you can provide (preferably links that will make you some money), would be appreciated.
I know very little about your type of printer. I know that some popular models have upgrade parts available from different sources.
I just upgraded the bed on my E3D Tool Changer printer with a bed from Mandela Rose Works (I think that is the correct spelling).
Frederick
Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6
-
@fcwilt Z went up, and then it went down. It sounded like a real printer / that's a first. My guess is, it's about 30mm off the bed at the moment. I think that was a choice in the RRF? That the first time Z homed, it stopped at 30 above?
-
@fcwilt I'll google them and go from there.
-
@fcwilt if you have the time, please send the X and Y code, then be off with you to your own time, and thank you in advance.
-
@mac said in I could use some help:
@fcwilt got it, ship me the X and Y code please. I'll test Z right now to confirm that the changes accomplished what I may have to use to correct X and Y if they aren't up to snuff.
OK
Homing X should look something like this:
G91 G1 H1 X-230 F3600 G1 X15 G1 H1 X-10 F360 G90 G1 X110 F3600 ; this just moves X to the centerline of the bed - doesn't matter where - it can be any place at all that suits you.Homing Y should look something like this:
G91 G1 H1 Y-230 F3600 G1 Y15 G1 H1 Y-10 F360 G90 G1 Y110 F3600 ; this just moves Y to the centerline of the bed - doesn't matter where - it can be any place at all that suits you.Now I would do homeall.g like this:
M98 P"homeZ.g"
M98 P"homeX.g"
M98 P"homeY.g"It is not as efficient as it can be but it does re-use the code you already have in the other axis homing files.
Now I have no idea what kinds of speeds your printer is capable off. I just used F3600 and F360 since they should be workable and safe. Feel free to pick other speeds as suits you.
Frederick
Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6
-
@fcwilt thanks very much. hopefully, I'll be printing the next time we speak.
-
@mac said in I could use some help:
@fcwilt thanks very much. hopefully, I'll be printing the next time we speak.
Did you get Z homing to work?
Frederick
-
@fcwilt Let's talk later. If I make a video of it, I'll send you a link.
-
This post is deleted! -
G91 ; relative positioning G1 H2 Z5 F3600 ; lift Z relative to current position G1 H1 X225 Y225 F1800 ; move quickly to X and Y axis endstops and stop there (first pass) G1 H2 X-5 Y-5 F3600 ; go back a few mm G1 H1 X225 Y225 F360 ; move slowly to X and Y axis endstops once more (second pass) G90 ; absolute positioning G1 X-10.875 Y4.375 F3600 ; go to first bed probe point and home Z G30 ; home Z by probing the bedThis is the code that's in the system. It doesn't look like your suggestion? So I'm not sure how to proceed.
