Extract temp to external display

[DIY-O-Sphere]

@tecno
In DWC it is here:

[tecno]

@DIY-O-Sphere

I have menu and creates Display folder and files in it. Still no go

[tecno]

But does not show in left column ?

[DIY-O-Sphere]

@tecno
Put all menu files directy into menu folder. You don't need the subfolder display.

[tecno]

@DIY-O-Sphere

Done and still no go. Is M918 P2 enough to initialize the display?

[DIY-O-Sphere]

@tecno

https://docs.duet3d.com/User_manual/Reference/Gcodes#m918-configure-direct-connect-display
Maybe check the contrast parameter
That is different to mine.....

[tecno]

@DIY-O-Sphere

M918 P2 E4 R6

Done no diff, but when I turn the encoder board resets.

[tecno]

Tried another set of cables = no go

Is it maybe so that there is no firmware, if so what files do I need?

[DIY-O-Sphere]

@tecno
Maybe swapped wiring?
Check if EXP1 + EXP2 on board and the display are plugged in correctly.

[DIY-O-Sphere]

@tecno
This is what it looks like in my menu folder

[tecno]

@DIY-O-Sphere

Cables are inserted OK . My menu folder is like yours.

Did you ever load in FW in your display board?

[DIY-O-Sphere]

@tecno
I do not use this type of display, but maybe this will help. There are also versions (think from MKS) where the plug must be turned 180 ° .

[tecno]

@DIY-O-Sphere

Tried those settings also, next to be a pin detective and see if there is something in wireing.

Thanks for help, appreciated.

Will try more tomorrow.

[tecno]

Pinout seems to be OK.

Is this display 5V and not compatible with Mini5+ ?

[tecno]

Why is there no DISPLAY in the left menu?

[DIY-O-Sphere]

@tecno
It's under System. Have a look at the screenshot I have posted yesterday.

[dc42]

@tecno did you get it working?

[tecno]

@dc42

Unfortunately no

[tecno]

Is there anybody out there (Pink Floyd) that can help me?

[DIY-O-Sphere]

@tecno
Can we have some picures of the wiring?