Problem on new installation / upgrade

[guywinslow]

@chrishamm Question: I installed DuetPi-arm64.zip and can't seem to login or logon. Has the user or password changed?

[Phaedrux]

@guywinslow said in Problem on new installation / upgrade:

@chrishamm Question: I installed DuetPi-arm64.zip and can't seem to login or logon. Has the user or password changed?

Did you use the Raspberry Pi Imager?

Best to create a new thread if you're still having issues.

[Tinchus]

@Phaedrux This issue happened also to me. I did used the pi imager. During the config process it asked to create an user. I did it. Later that user nor the default pi user were recognized

[Phaedrux]

Perhaps @chrishamm can confirm if the pi imager user setup should be working?

[chrishamm]

@Tinchus Please check if this problem is still present in our latest builds. I believe I saw this problem once before, but it seems to be gone in all four DuetPi builds that I just released. I double-checked this time.

[Tinchus]

@chrishamm Will do, thanks. Where can I find those releases? the images posted here https://docs.duet3d.com/en/User_manual/Machine_configuration/SBC_setup have same name and date as the others so I guess are old ones

[chrishamm]

@Tinchus You can find them here: https://github.com/Duet3D/DuetPi/releases/tag/bookworm-2024-09-19 I've updated the links, too.

[Tinchus]

@chrishamm I have installed that image. I can confirm the log problem is gone, also I can notice a great perfomance improvement over the 64 bit version on the raspi 3 B+.

I have 2 problems now: the image downloaded intalled version 3.5.3 od DWC and DSF 3.5.3, but version 3.5.2 of board version still remains to be 3.5.2 and of course the DWC compalins about not being the same version.

I tried to update using

sudo apt update

sudo apt upgrade

Some packages were update,very few, but not the board firmware, I never got the request as usual to do that. I tried to update the firmware through DWC and I cant because it says Im on SBC mode.

So, how can I update my foirmware on the board? (duet 3 SBC mode)

[jay_s_uk]

@Tinchus M997 S0 should do it

[Tinchus]

@chrishamm said in Problem on new installation / upgrade:

Bookworm

Thnaks you all. I think this post can be considered as SOLVED.

As a recap:
at least for me, the 64 bits version is really not running with enough resources on a a raspi 3 B+, too slow, I got many weird erros on daemoin.g file, camera issues, etc.

The 32 bit version is now running as suposed to.

LCD touch screen in my case needs extra config to run on bookworm, I found the solucion here: https://www.waveshare.com/wiki/Main_Page#RPi-Displays (llok for your model)