Update Duet 2 wifi from 3.1.1 to 3.5.4
-
hi guys,
I upgraded first to 3.3 and later to 3.54 the duet 2 wifi and also the panel two 5. I did two quick and easy test prints and everything seems to work, even the automatic bed level which I had doubts about.I would like to ask for help on two issues:
-
Panel two after a certain time turns off the display (goes to standby) despite from its menu I selected scrennsaver =0);
-
The DWC is different from my old version. Where can I find information to read for pluging? Basically the ones that are present are all in a stopped state, is that right?
-
-
@luc said in Update Duet 2 wifi from 3.1.1 to 3.5.4:
The DWC is different from my old version. Where can I find information to read for pluging? Basically the ones that are present are all in a stopped state, is that right?
https://docs.duet3d.com/en/User_manual/Reference/Duet_Web_Control_Manual#plugins-tab-built-in
@luc said in Update Duet 2 wifi from 3.1.1 to 3.5.4:
Panel two after a certain time turns off the display (goes to standby) despite from its menu I selected scrennsaver =0);
Can you share a photo of your settings tab on the PanelDue?
@luc said in Update Duet 2 wifi from 3.1.1 to 3.5.4:
Maybe I'm asking too much and I don't want to bother
No problem at all. It may be useful to you to create a new config file set using the online config tool just so that you can compare the syntax with your existing files to see where things have changed.
https://configtool.reprapfirmware.org/
You can also send M98 P"config.g" in the gcode console and any errors in syntax in config.g will be returned.
-
@Phaedrux said in Update Duet 2 wifi from 3.1.1 to 3.5.4:
You can also send M98 P"config.g" in the gcode console and any errors in syntax in config.g will be returned.
I just get this message:
But going to check in config.g the entry H1 i read M143 H1 S280 . Where he reads 737°C?
-
@Phaedrux said in Update Duet 2 wifi from 3.1.1 to 3.5.4:
Panel two after a certain time turns off the display (goes to standby) despite from its menu I selected scrennsaver =0);
Can you share a photo of your settings tab on the PanelDue?
I may have solved it by setting "Newer dim" -
@luc said in Update Duet 2 wifi from 3.1.1 to 3.5.4:
Where he reads 737°C?
This is just a warning telling you what the predicted max temperature for that heater would be in an uncontrolled situation.
-
@Phaedrux said in Update Duet 2 wifi from 3.1.1 to 3.5.4:
@luc said in Update Duet 2 wifi from 3.1.1 to 3.5.4:
Where he reads 737°C?
This is just a warning telling you what the predicted max temperature for that heater would be in an uncontrolled situation.
So the syntax in config.g should be correct. Is that right?
-
@luc It didn't throw any obvious errors at least, so that's good.
-
@Phaedrux
Thank you very much for your helpfulness but let me ask one last question:
Assuming that I think everything works as I printed two quick things ....
How come some words are in red color? -
@luc said in Update Duet 2 wifi from 3.1.1 to 3.5.4:
How come some words are in red color?
that's just the syntax highlighting in the gcode editor view to aid readability
-
@Phaedrux Okay, thank you very much!
-
undefined Phaedrux marked this topic as a question
-
undefined Phaedrux has marked this topic as solved
