Suitable webcams for displaying progress in the webui?

fma

I'm using this solution too!

webdad

I've got the Zerow and the camera, just haven't had the time to start working on it. What case(s) are you using?

fma

This one:

https://www.thingiverse.com/thing:2300226

webdad

Oh I am so printing that. Thanks!

fma

Be aware that the nut trap seems to be made for 1/8" or 3/8" (photo standard), and not M8… But you can use M6 (you will have to maintain the nut while screwing).

Scott_H

I'm using the Sannce ip camera mentioned on the wiki - $40 delivered to Australia, so cheaper than the pi+camera.

I was using the snapshot cgi method, but changed to using http://192.168.1.6:16325/videostream.cgi?loginuse=MyUserName&loginpas=MyPassword, and ticking the embed webcam stream under DWC settings.
Can confirm that this method works perfectly under chrome on windows.

If it doesn't work for you, changing the webcam update interval to, ie, 0.1 seconds may be a workaround.

I couldn't find the ip camera page on the new wiki, so am posting here.

JuJuDelta

I have found my RPi Zero W solution to be quite prone to uSD card corruption with power on/off.

I will try the Sannce Wireless IP camera.
Found it here £25 UK free delivery.

https://www.manomano.co.uk/cctv-camera/sannce-720p-smart-wireless-ip-camera-remote-access-4134074

dc42

We missed the webcam page when we migrated the wiki, but it's now at https://duet3d.dozuki.com/Wiki/How_to_include_a_web_camera_image_in_Duet_Web_Control.

Scott_H

Ah thanks! Have added that information to the wiki. I attempted to follow the document formatting, though I am a wiki novice so…

webdad

@Martins and @fma - Got my Pi Zero W / V2 Camera all set up and it is showing up on DWC. Are you doing anything to control when the camera is on or off? starts / stops recording?

fma

For now, my picam is powered with a AC-to-USB converter, and all is switched-on switched-off at the same time with the main switch.

I didn't check yet how to start a timelapse or a video. I will ask MotioneyeOS dev if it is possible through a GPIO input.

Phaedrux

@martins:

another solution here is Raspberry Pi zerow or rpi3 or any (zerow+cam = cheapest option)
all you need is to install motioneyeos https://github.com/ccrisan/motioneyeos/wiki/Supported-Devices

after you connect to you network with it , just open IP asigned by dhcp for you
log in username admin password empty

few steps to setup fast network cam

http://www.bbmail.co/duet/dwcam/1.png

http://www.bbmail.co/duet/dwcam/2.png

after set fast network cam hit Apply button

http://www.bbmail.co/duet/dwcam/3.png

copy url displayed in step 5

fill in DWC

http://www.bbmail.co/duet/dwcam/4.png

and you get at the end

http://www.bbmail.co/duet/dwcam/5.png

hope this helps someone

This worked like a charm. Thanks.