2nd Printer, same issue with steppers only going diagonal
-
@interwebsdesigner said in 2nd Printer, same issue with steppers only going diagonal:
M667 S2 Z3 ; set CoreXY mode
Are you sure you have an XZ printer?
-
@joergs5 Good catch!
-
@phaedrux 1.21 is the version. And yes, 0,0 should be at the front left corner. I have my first build which this is identical to also and works appropriately.
-
@joergs5 good catch indeed. That was it. Silly mistake when going through the docs sent above. Everything is working as expected. Maybe by the 3rd one I won't have trouble
Thanks guys. -
@interwebsdesigner The mistake was not easy to detect, because the comment said XY.
Nice that so many people use CoreXY.
-
@interwebsdesigner said in 2nd Printer, same issue with steppers only going diagonal:
@joergs5 good catch indeed. That was it. Silly mistake when going through the docs sent above. Everything is working as expected. Maybe by the 3rd one I won't have trouble
Thanks guys.What was it?
I wasn't able to follow the back and forth.
Thanks.
Frederick
-
@fcwilt it was set to core XZ mode instead of core XY
-
@phaedrux said in 2nd Printer, same issue with steppers only going diagonal:
@fcwilt it was set to core XZ mode instead of core XY
Thank you.
What is a Core XZ printer? I cannot visualize how that would work. Any videos or pictures of such a printer?
Frederick
-
-
@phaedrux said in 2nd Printer, same issue with steppers only going diagonal:
@fcwilt https://m.youtube.com/watch?v=aPxX8slszdE
https://reprap.org/forum/read.php?2,377858
Interesting machine
Thanks very much.
Frederick
