Duet Wifi fans not working
3DRikat last edited by
I wired my new DuetWifi to my Anycubic Kossel Linear Plus and the fans aren't working. I found this thread: https://forum.duet3d.com/topic/4190/fans-not-working and I'm pretty sure I have the same problem. Since I'm new to this, I don't know exactly how to use the multimeter and how to fix this problem.
Could someone please give me a step-by-step instruction on this exact problem?
If none of the fan outputs is working (even the always-on outputs):
- Check that you have a jumper on the V_FAN jumper block, to connect the centre pin either to the VIN pin or to the 5V pin
- If your Duet is revision 1.03 or later, check the 1A blade fuse
3DRikat last edited by 3DRikat
Thanks for you answer. None of the outputs is working (including the always-on outputs). The jumper is on the V_FAN jumper block and connects to the VIN pin. I checked the 1A blade fuse and it's working. I have the latest Duet version.
Is there something else I can do?
Concentrate on getting the always-on outputs working. First of all, do you have the fan red (+) and black (-) wires connected the right way round? Are you sure that the fan works?