@scrhall dont know if you allready seen this, but here is
https://forum.duet3d.com/topic/19970/duet-3-controlled-by-ps3-remote-via-bluetooth

Hello,

this message juste to share my ridiculous first experience with duet 3d and Kisslicer.

I am a kisslicer user for long time, et i recentely decided to upgrade my printer with a Duet3d. ( great great idea, realy)

• Upgrade check
• Slicer a 2cm box with my old friend kisslicer check
• Upload an print check
• Set a f*ing password on my duet web client not knowing where and how ... check

After screaming for a least 10 minuts continuously, I find that le M551 command set a password.
And by default Kisslicer use M551 for ... for... i dont know for what, but I finaly find the password on the printer gcode file ^^.

May that help somone.

Bye.

Hi,

I use a Duet3 + SBC and I'am realy not good with linux things.

But at one moment in the past I switched to the unstable branch.
Now I whant to come back to the stable one but can't find how to do this.

I didn't even remember how I did this the first time.

I'am crawling the wiki without success.

Can anyone help.

Thank you

Good to hear that
Thank you for the support

@chrishamm said in Duet 3 +SBC : Print randomely freeze when runin my script on RPI:

await Task.Delay(1000);

The workaround seems to work but it gives me many "Error parsing response" in the PanelDuet console

@chrishamm Great, I'll test that today.

I thought I was abandoned alone with my problem

Are there come log that I can check to see what is appening in the Duet ?
Or what gcode is effetively executed .

The duet stop printing but the script continue

It crash the print even with the 3.2.0-b4.1

here is my M122

M122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.2-beta4.1 running on Duet 3 MB6HC v1.01 or later (SBC mode)
Board ID: 08DJM-956BA-NA3TN-6JTDG-3SD6J-TABLT
Used output buffers: 4 of 40 (15 max)
=== RTOS ===
Static ram: 123292
Dynamic ram: 137988 of which 36 recycled
Never used RAM 130876, free system stack 188 words
Tasks: Linux(ready,77) HEAT(blocked,297) CanReceiv(blocked,947) CanSender(blocked,371) CanClock(blocked,352) TMC(blocked,49) MAIN(running,1161) IDLE(ready,19)
Owned mutexes: HTTP(MAIN)
=== Platform ===
Last reset 00:25:28 ago, cause: software
Last software reset at 2020-12-09 15:50, reason: HeatTaskStuck, GCodes spinning, available RAM 130188, slot 0
Software reset code 0x4143 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0040080f BFAR 0x00000000 SP 0x20410144 Task MAIN
Stack: 2042328c 00429512 81000000 00000000 3e958000 00000000 4079a000 401fc5e4 3f9ca0f0 4530c6d9 4530c6d9 44b0c6d9 49371b00 37533333 43d697a0 00000000 42117d81 3f800000 00000000 60000011 20426c58 2040e0b4 20426c58 00000000 20423af8 00000080 a5a5a5a5
Error status: 0x00
MCU temperature: min 35.1, current 37.4, max 37.6
Supply voltage: min 24.8, current 25.0, max 25.0, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.0, current 12.0, max 12.1, under voltage events: 0
Driver 0: position 0, standstill, reads 12980, writes 14 timeouts 0, SG min/max 0/0
Driver 1: position 0, standstill, reads 12981, writes 14 timeouts 0, SG min/max 0/0
Driver 2: position 0, standstill, reads 12980, writes 15 timeouts 0, SG min/max 0/0
Driver 3: position 0, standstill, reads 12981, writes 15 timeouts 0, SG min/max 0/0
Driver 4: position 0, standstill, reads 12983, writes 14 timeouts 0, SG min/max 0/0
Driver 5: position 0, standstill, reads 12987, writes 11 timeouts 0, SG min/max 0/0
Date/time: 2020-12-09 16:16:44
Slowest loop: 4.12ms; fastest: 0.12ms
=== Storage ===
Free file entries: 10
SD card 0 not detected, interface speed: 37.5MBytes/sec
SD card longest read time 0.0ms, write time 0.0ms, max retries 0
=== Move ===
FreeDm 375 (min 375), maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP* is doing "M122" in state(s) 0
Telnet is idle in state(s) 0
File* is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger* is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== CAN ===
Messages queued 6111, send timeouts 13750, received 0, lost 0, longest wait 0ms for reply type 0, free buffers 47
=== SBC interface ===
State: 0, failed transfers: 0
Last transfer: 19ms ago
RX/TX seq numbers: 15632/53872
SPI underruns 0, overruns 0
Number of disconnects: 0, IAP RAM available 0x209d8
Buffer RX/TX: 0/0-0
=== Duet Control Server ===
Duet Control Server v3.2.0-beta4
Code buffer space: 4096
Configured SPI speed: 8000000 Hz
Full transfers per second: 1.96

@chrishamm it crash the same with your rewrite.
It stoped printing after about 30 minutes.

How can I switch to 3.2.0-b4.1 ?

@bearer of course. Or I can set my fan at 20% all the time.

How to do it, is not my question.
I think that no matter how I do it, le DWS schould'nt crash my print.

And that's precisely why I'm asking.

@chrishamm thanks for the rewrite, I'll check that later.

I think It will crash the same as the probleme occurs even with juste as bash script.

here is my M122 results :

m122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.1.1 running on Duet 3 MB6HC v1.01 or later (SBC mode)
Board ID: 08DJM-956BA-NA3TN-6JTDG-3SD6J-TABLT
Used output buffers: 1 of 40 (13 max)
=== RTOS ===
Static ram: 154604
Dynamic ram: 163424 of which 44 recycled
Exception stack ram used: 544
Never used ram: 74600
Tasks: NETWORK(ready,1968) HEAT(blocked,1188) CanReceiv(suspended,3820) CanSender(suspended,1384) CanClock(blocked,1436) TMC(blocked,204) MAIN(running,2672) IDLE(ready,76)
Owned mutexes:
=== Platform ===
Last reset 00:03:57 ago, cause: software
Last software reset at 2020-12-07 11:16, reason: User, spinning module LinuxInterface, available RAM 74600 bytes (slot 0)
Software reset code 0x0010 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0444a000 BFAR 0x00000000 SP 0xffffffff Task MAIN
Error status: 0
MCU temperature: min 31.4, current 37.0, max 37.2
Supply voltage: min 24.8, current 24.8, max 25.0, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.0, current 12.1, max 12.1, under voltage events: 0
Driver 0: standstill, reads 41519, writes 14 timeouts 0, SG min/max 0/0
Driver 1: ok, reads 41517, writes 17 timeouts 0, SG min/max 0/99
Driver 2: standstill, reads 41512, writes 22 timeouts 0, SG min/max 0/969
Driver 3: standstill, reads 41512, writes 22 timeouts 0, SG min/max 0/1023
Driver 4: ok, reads 41518, writes 17 timeouts 0, SG min/max 0/142
Driver 5: standstill, reads 41525, writes 11 timeouts 0, SG min/max 0/0
Date/time: 2020-12-07 11:20:27
Slowest loop: 4.70ms; fastest: 0.14ms
=== Storage ===
Free file entries: 10
SD card 0 not detected, interface speed: 37.5MBytes/sec
SD card longest read time 0.0ms, write time 0.0ms, max retries 0
=== Move ===
Hiccups: 0(0), FreeDm: 374, MinFreeDm: 373, MaxWait: 23941ms
Bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves: 65, completed moves: 64, StepErrors: 0, LaErrors: 0, Underruns: 0, 0  CDDA state: 3
=== AuxDDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0  CDDA state: -1
=== Heat ===
Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by Aux
HTTP* is ready with "M122" in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux* is idle in state(s) 35 0, running macro
Trigger* is idle in state(s) 0
Queue* is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon* is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 1.03ms; fastest: 0.01ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions
HTTP sessions: 0 of 8
- Ethernet -
State: disabled
Error counts: 0 0 0 0 0
Socket states: 0 0 0 0 0 0 0 0
=== CAN ===
Messages sent 940, longest wait 0ms for type 0
=== Linux interface ===
State: 0, failed transfers: 0
Last transfer: 18ms ago
RX/TX seq numbers: 7547/7549
SPI underruns 0, overruns 0
Number of disconnects: 0
Buffer RX/TX: 0/0-0
=== Duet Control Server ===
Duet Control Server v3.1.1
Aux:
Finishing macro deployprobe.g, started by G29
> Next stack level
Executing macro bed.g, started by system
Number of flush requests: 1
> Next stack level
Code buffer space: 4096
Configured SPI speed: 8000000 Hz
Full transfers per second: 32.60