@droftarts Solved, thank you

@droftarts I can see and use all the files, including the macro, but I can't print from the external sd card
I use RRf 3.4 and I put this menu for mini 12864 https://github.com/tinkerlifeprojects/DUET3D_12864LCD_MenuFiles
I think this is where the problem lies
I will put the one recommended by you

Hello
I configured Duet 3 mini 5+ wifi with Fysetc Mini12864 Panel V2.1
Something is not working
I can control the printer but I can't print from the SD card mounted in the Mini12864
It does not appear on the display
What can it be?
these are the settings for the display
M918 P2 E2 F2000000
M150 X2 R255 U255 B255 S3
M21
M21 P1
M23 filename.gco
M24
M25
M26 S49315
M32 filename.g
M32 "filename.g"

@dc42 I use ribbon cable and the displayed status is connected, my IP appears but that's it
I used the same panel due to a 2 wifi duet board and it works correctly there

@davea I added a zero in the post but in the config it's correct
M575 P1 S1 B57600

Hello
I have a Duet 3 Mini 5+ with PanelDue, I use RRF3.2.2 and on panel due I have version 3.2.11
I would write command lines for the panel
M575 P1 S1 B576000
When the printer is turned on, the panel lights up, it shows me that the wifi connection has been made, but that's all, I can only access the setup menu
I mention that the duel panel on a printer with duet 2 wifi works
I don't know where the problem comes from
Has anyone else hit her?

there are 3 pairs of arms with different values and they are also in config g

I don't think it helps me because this difference is not constant, I could adjust it from the slicer if it was like that, but it doesn't work
I have for example the following values on one axis, as the others differ
24.68
19.78
14.82
9.95
5.06
print_measure (3).stl

My delta printer does not print in the accurate dimensions, they differ on x and y and are different if the part has different lengths
How can I correct?