Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. Serhii
    • Profile
    • Following 0
    • Followers 0
    • Topics 2
    • Posts 7
    • Best 0
    • Controversial 0
    • Groups 0

    Serhii

    @Serhii

    0
    Reputation
    1
    Profile views
    7
    Posts
    0
    Followers
    0
    Following
    Joined Last Online

    Serhii Unfollow Follow

    Latest posts made by Serhii

    • RE: Delta calibration G32 Offset issue

      @droftarts thank you for your help.

      I finally got the following result:
      8d5eb424-e2d3-4fc7-94d4-ee686b042ac4-image.png

      posted in Tuning and tweaking
      Serhiiundefined
      Serhii
    • RE: Delta calibration G32 Offset issue

      @droftarts

      Some information about the board and FW

      Board: Duet 2 WiFi (2WiFi)
      Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.4.0 (2022-03-15)
      Duet WiFi Server Version: 1.26
      

      config.txt

      ; Z-Probe
      M558 P5 C"^zprobe.in" H5 F120 T6000            ; set Z probe type to switch and the dive height + speeds
      G31 P500 X0 Y0 Z14.82                          ; set Z probe trigger value, offset and trigger height
      M557 R85 S20                                   ; define mesh grid
      

      I removed the H option from the bed.g file

      G30 P0 X0.00 Y90.00 Z-99999
      G30 P1 X57.85 Y68.94 Z-99999
      G30 P2 X88.63 Y15.63 Z-99999
      ...
      

      The result looks the same
      56f5e74d-ea0c-4ee0-a2b4-fea4e0da125e-image.png

      posted in Tuning and tweaking
      Serhiiundefined
      Serhii
    • RE: Delta calibration G32 Offset issue

      @droftarts Thank you for the quick replay.
      I have attached my config file
      config.g
      Could you suggest which changes should be made?

      posted in Tuning and tweaking
      Serhiiundefined
      Serhii
    • Delta calibration G32 Offset issue

      Hello everyone.
      I would like to ask for some help with the following issue:
      HightMap.png
      Setup:
      [3D printer]
      I have a Kossel anyCubic 3D printer with a Duet3D board.
      [Sensor]
      A mechanical switch.
      [bed.g]
      M561 ; clear any bed transform
      G28 ; home all towers
      G30 P0 X0.00 Y90.00 Z-99999 H-14.82
      G30 P1 X57.85 Y68.94 Z-99999 H-14.82
      G30 P2 X88.63 Y15.63 Z-99999 H-14.82
      G30 P3 X77.94 Y-45.00 Z-99999 H-14.82
      G30 P4 X30.78 Y-84.57 Z-99999 H-14.82
      G30 P5 X-30.78 Y-84.57 Z-99999 H-14.82
      G30 P6 X-77.94 Y-45.00 Z-99999 H-14.82
      G30 P7 X-88.63 Y15.63 Z-99999 H-14.82
      G30 P8 X-57.85 Y68.94 Z-99999 H-14.82
      G30 P9 X0.00 Y45.00 Z-99999 H-14.82
      G30 P10 X38.97 Y22.50 Z-99999 H-14.82
      G30 P11 X38.97 Y-22.50 Z-99999 H-14.82
      G30 P12 X0.00 Y-45.00 Z-99999 H-14.82
      G30 P13 X-38.97 Y-22.50 Z-99999 H-14.82
      G30 P14 X-38.97 Y22.50 Z-99999 H-14.82
      G30 P15 X0 Y0 Z-99999 S6
      G28 ; home all towers

      Z_probe.png

      Thank you in advance.

      posted in Tuning and tweaking
      Serhiiundefined
      Serhii
    • RE: Config.g: How to configure it ?

      @zapta You are right I followed instructions from @deckingman and it worked.
      I have shared a new config file in the previous reply.

      posted in General Discussion
      Serhiiundefined
      Serhii
    • RE: Config.g: How to configure it ?

      @deckingman Thank you for your reply. I managed to get a new configuration.
      config.g
      IMG_20230729_183606.jpg

      It would be great to have a common place to keep configuration for different machines.
      I have some question about calibration. Could you suggest another topic or continue here ?

      posted in General Discussion
      Serhiiundefined
      Serhii
    • Config.g: How to configure it ?

      Dear community.
      I would like to ask you for some help with the following issue.

      Setup:
      3D printer: Delta "Anycubic plus"
      Board: Duet 2 WiFi (2WiFi)
      Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.4.0 (2022-03-15)
      Duet WiFi Server Version: 1.26

      Error:
      M98 P"config.g"
      Error: bad drive number
      Error: in file macro line 27: G10: Invalid tool number
      Error: in file macro line 28: G10: Invalid tool number
      HTTP is enabled on port 80
      FTP is disabled
      TELNET is disabled
      Error: in file macro line 42 column 24: M92: array too long, max length = 0
      Error: in file macro line 43 column 19: M350: array too long, max length = 0
      Error: in file macro line 44 column 28: M566: array too long, max length = 0
      Error: in file macro line 45 column 34: M203: array too long, max length = 0
      Error: in file macro line 46 column 25: M201: array too long, max length = 0
      Error: in file macro line 47 column 25: M906: array too long, max length = 0
      Error: Fan number 2 not found

      File:
      config.g

      Thank you in advance.

      posted in General Discussion
      Serhiiundefined
      Serhii