@DC42 Please respond.

hello,
Is it not possible to resume print after power failure when the files are in the Card 1 on the Paneldue.i was getting Error M23: Gcode file "1:/name.gcode" not found Error M24: cannot print because no file is selected!
Resume print works fine while using online with duet 2 wifi onboard SD card.

Duet 2 wifi on V 2.02(RTOS) (2018-12-24b1)
Paneldue on V1.23.2

hello,
Is it not possible to resume print after power failure when the files are in the Card 1 on the Paneldue.i was getting Error M23: Gcode file "1:/name.gcode" not found Error M24: cannot print because no file is selected!
Resume print works fine while using online with duet 2 wifi onboard SD card.

Duet 2 wifi on V 2.02(RTOS) (2018-12-24b1)
Paneldue on V1.23.2

does Firmware Version: 2.02(RTOS) (2018-12-24b1) has the fix? It doesnt seem to work for me.

@DC42 sir this feature is still not available?

anyone using cura for delta printers? Or please do recommend any other slicer for delta printers compatible with Duet ( Other than slic3r )

@phaedrux WOWWW!!! adding the interpolation just made the printer SUPER silent.

But still there is under extrusion

@burtoogle i will try increasing the micro steps like @Phaedrux suggested.

@naqaj i had made it to 1.75 while making the custom machine profile on latest version. let me confirm it again. Thank you

@phaedrux am on the latest version released 2.02(RTOS) (2018-12-24b1).
Increasing the micro steps will solve my issue sir?