@Phaedrux

You are right, I didn't even remember about this parameter. Thank you very much

four tries axis z homing (first from low altitude)

The pid works fine, but when I park my head through the G30 command, I see the temperature drop. After the end of parking, the temperature returns to the set value.

what am I doing wrong ?

@dc42 thanks a lot !

I didn't find the file on GitHub too

@wilriker said in PanelDueFirmware 3.2.4 released:

You could try to use the PanelDue-v3-5.0.bin instead. It might work since it uses a slightly different display driver.

But note that for clones there is no support.

You were right, the firmware came up, the red color is in place. Thank you very much!

I followed the instructions
Can't find String.h file in RRFLibraries\src\General \

Where can i find it?
Thanks.

the first thing I did was update the firmware to 3.2.4, then I noticed that the red and blue colors were changed

I don’t know how it was before the firmware update

I tried now to update 4.3 (v3.0) display to version 3.2.4 - red color in place

Hello,
on the last sale bought fystec paneldue 5i (clone), updated it to 3.2.4. Installed and turned on the power. I was very surprised to change the color palette from RGB to BGR. Is this a display issue or a firmware feature?

Thanks.