@zapta @Phaedrux

That would be great and help me a lot!

@o_lampe I am very interested in this.
I would like to connect a servo to the duet2 with an external power supply via a dc-dc stepdown.

see https://forum.duet3d.com/topic/22783/servo-wiring-with-external-power-source-to-the-duet2

@zapta OK, I hope I have understood correctly

My current solution looks like this. I left the jumper "JUMPER: INT 5V EN" plugged in.

@zapta I have already read through this page. Unfortunately, I could not find any information on how to properly connect an external power source for the servo.

Hey all, im looking for a wiring diagram on how to correctly connect a servo motor to a duet2 with an external power source.

I want to connect a buck step down module like LM2596 to the 24V power supply and use it to power a 5V servo and also connect the duet2 to the same 24V power supply and control the servo via the duet2.

I grateful to all for the help.