@gloomyandy Thanks, I will wil swap it with a fan

Latest posts made by Addithy
-
RE: Issue with emergency stop
-
RE: Issue with emergency stop
@gloomyandy I use a SSR to control a 230v heater. I will try to see if i can swap some things around. but it's not an issue on the on the OUT3-7 on the duet 6XD i i have SSR relays connected to the output, and they do not turn on when i press the emergency button.
-
RE: Issue with emergency stop
@gloomyandy Because all the other outputs are being used for fans and heaters
It's a Toolboard 1LC v1.3
-
Issue with emergency stop
I have wired the emergency stop button to:
M950 J1 C"!io5,in"
M581 P1 T0 S1 R0When i press the button the heater turns on, its only an issue on the toolboard
M950 H5 C"121.out2" T4how can i fix this?
-
RE: Duet 6XD thermosistor Issue
@droftarts thank you for the quick response I will try that.
-
Duet 6XD thermosistor Issue
Hello
I'm currently configuring 4 thermistors and I have an issue.
Temp0 and Temp1 show 20, and the Temp2 and Temp3 shows 25. If I check with the same sensor. All ports are configured the same.M308 S0 P"temp0" Y"thermistor" T100000 B3950 A"Nozzle"
M308 S1 P"temp1" Y"thermistor" T100000 B3950 A"Heat Zone 1"
M308 S2 P"temp2" Y"thermistor" T100000 B3950 A"Heat Zone 2"
M308 S3 P"temp3" Y"thermistor" T100000 B3950 A"Heat Zone 3"
Can someone help?