Topics created by Bart1992

It sounds like it may be a browser issue, or an extension blocking something.

When trying to reach DWC can you try opening the developer console of the browser to see what errors may be showing?

@bart1992 you can buy thermocouple extension wire. It should be the same type as the thermocouple, for example K type extension wire if the thermocouple is K type. Twisted pair is better than flat pair. Here are some examples that I found by googling "thermocouple wire": https://uk.rs-online.com/web/c/automation-control-gear/sensors/thermocouple-extension-wire/.

You can also buy purpose-made connectors for thermocouples cables, alternatively just use a very small terminal block.

@bart1992 I guess DWC 2.0.7 doesn't support multiple bed heaters. Probably that's because the status report that DWC 2 and earlier use doesn't have multiple values for bed heaters. DWC 3 uses the RRF3 object mode instead and does support multiple bed heaters.