hello, sorry for the response time, I did not have time to connect. the evening I posted my message, I saw my mistake. I used the XY configuration instead of Cartesian. Thank you for your reply

Hello,
I have a problem with the X and Y axes, when I move X from the computer Y also moves.

When I move Y, X also moves.

The problem is also present when the head goes into position to start printing.
But during printing there are no problems

My object prints in the bottom right (and overflows from the bed) instead of the middle of the bed

I have another problem, my print is rotated 90 °,

on the photo it is the Calibration cube available on Thinginverse.

Have a good day .

Thank you

photo of printing problem

@deckingman @dc42 ok, thank's

Hello, I received the holy grail: ') (my duet 2 Wifi)

My English is not perfect, so before making a mistake on the connection I prefer to ask the question.

If I understood correctly, if I use this sensor (NTC3059):

I don't need a daughter card.

If I use this one (PT100 A or PT100B):

i need a daughter card

it's correct?

Thank's