Topics created by bkdfkup

First print after updating firmware went well using the same gcode as the last skewed print. No more skews, just some over-extrusion on the seam that needs some tweaking.

Hopefully the RC firmware was the issue. I'm running a second test now, and can hopefully call this one resolved.

@dc42 said in Duet Smart Effector LEDs:

blown due to running the effector on 24V with jumper JP3 in

Thanks for the response, it was absolutely on-point. I will do some testing to try narrow it down.

@bkdfkup
you may want to try using > M955 P0 C"spi.cs4+spi.cs3"
I've had two boards that for some reason didn't work when connecting my accelerometers to it, but did via the daughterboard pinout command.
Probably wont work, but its quick and free so its worth a try.