Topics created by boriss

@boriss said in Duet 3 mini 5+ Thermistor pull-up resistor:

Hello!

Could some one help me with Thermistor pull-up resistor nominal? Is it 2.2k?

Yes. RepRapFirmware knows that, so you don't normally need to specify it in the M308 command.

@engikeneer
Thanks a lot. That is all I need to know!

@boriss in that case, if your wiring is correct, then based on my previous investigations it's probably the capacitance between the CS wire and other wires that is causing the problem. The Mini 5+ has an output series resistor that makes the wiring more sensitive to this capacitance.