Topics created by CadetC

@cadetc said in RRF 3.4b3 - bed heater fault:

ad to delete fault once, then everything was OK.
After about 30 minutes temperature quite stable, small fl

Refer to https://forum.duet3d.com/topic/24809/3-4-0-beta-3-heater-0-fault/12

@dc42 said in Toolboard with built in accelometer +SBC - failed promise:

@cadetc @Arnold_R_Clark you might like to try the new RRF internal build at https://forum.duet3d.com/post/242317. I think it should work with accelerometers on tool boards even without the DSF update, however have not tested that. Test it with care, because input shaping i still being debugged.

Thank You 😉 I' ll try it, I'll be sure to add my observation.