Topics created by CarlJ

Ok, made some progress, (I hope), maybe just screwed it all up.
Below is what I got just running G32, no homing before G32, just power up and enter G32.

3:52:28 PM 9 points probed, min error -0.139, max error -0.024, mean -0.072, deviation 0.037
Height map saved to file heightmap.csv
3:51:46 PM Leadscrew adjustments made: -0.112 -0.287 0.118 0.125, points used 4, deviation before 0.127 after 0.000
3:51:23 PM Leadscrew adjustments made: -0.413 -1.085 0.258 0.559, points used 4, deviation before 0.481 after 0.000
3:51:00 PM G32
Leadscrew adjustments made: -0.511 -3.126 1.381 3.300, points used 4, deviation before 1.721 after 0.000

Changed config.g
Changed bed.g
Added bed_probe_points.g

bed.g and bed_probe_points.g was put in sys folder

config (2).g

bed (2).g

bed_probe_points.g

Height Map.png

I used some of the files from fulg/voron on github.

Please elaborate if I may have caused me trouble later doing it this way.
Your assistance has been greatly appreciated.

CarlJ

Very good, guess need to scroll down alot to see it.
Fixed that.
Now to proceed to next hurdle. Usually I find what I need looking thru the posts. So I don't make many requests.
It's been a learning experience.

Thank You