Posts made by ccollinscj

@oliof Thank you sir......:)

@oliof what does IIRC stand for?

@phaedrux That did not work either I am still showing, "Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.3 (2021-06-15)" Even thought it said it was install 3.0.

And now getting :
Error: short-to-ground reported by driver(s) 2 4 9
Error: over temperature shutdown reported by driver(s) 2 4 9

This was working this morning, not until I updated the firmware I am having all these problems, more so than what I was having with the stock firmware.

@phaedrux Ok thank you, I am trying it now.

@phaedrux Load 3 files:

DuetWiFiServer.bin
Duet2CombinedIAP.bin
Duet2CombinedFirmware.bin

In this order from my config.zip backup. I still a nub with this board, am I missing something

@phaedrux reverse the installation of 3.3 and go to a prior version. Sorry I am IT guy.

I am getting, looking around the forum it does not look good, so I tried to back out and it has failed as well. Any suggestions.

Warning: motor phase A may be disconnected reported by driver(s) 0 1
Warning: motor phase B may be disconnected reported by driver(s) 0 1