Posts made by CodonExe

@ThePigSlayer:

I agree with Sniffle, using the bl touch for homing is great and if your bl touch works (just test deploy and retract) then there isnt really much of a reason to use a endstop over the probe for homing.

Also you can use m400 and m401 (double check) to retract and deploy the probe.

Last thing I am not sure if most people do it differently, but I use my bed.g file and I fill it with my mesh leveling code, well it homes first in the center and then does the mesh leveling. I can copy it if you want

Please do. I would like to see it.

Step Accuracy of ±5% seems a bit high to me. What kind of gear pack are you going to use?

I think my Rostock Max V2 can fit inside your build envelope! Very nice machine, thanks for showing us!

I use the Molex Microfit as well for my collection of hotend assemblies. They are rated at 8.5amps

You guys are great! Thank you!

Ok I wont, thanks for looking into that!

I smelled the smoke and quickly unplugged it, I am looking through everything now to see if I can find what went wrong.

Well, I had a series of unfortunate events. The SD card had a melt down(burned a hole through the top corner) took out my Duet Wifi and my paneldue.

Yup. Probably just an odd ball of the bunch. Duet Wifi is working like champ now!

T3P3Tony, thanks for your help! It was just a bad SD card, or the issue is corrected by a higher class SanDisk.

I will check after my print completes. I will also verify if the SD card itself is the culprit and test different file sizes and different slicers.

800-900kb file. It is just the print file.

Would anyone have a suggestion on this? I am unable to upload gcode to my Duet Wifi through the web interface. When I attempt to upload a print I get about half way through the upload and displays an error in the progress bar and I lose access to the SD card(I detect no errors on the wifi connection). I still can control my printer but config file is not accessible until restart. I can pull the SD card out and plug it in my computer to upload the files and controls and prints fine until I attempt upload. I am running:

Firmware Version: 1.15-beta3 (2016-07-09)
Web Interface Version: HTML: 1.11, JS: 1.11a-dc42

Thanks for any advice.

My vote is:

1. C. Predictive temperature control
2. J. Dynamically-varying microstepping
3. I. Faster microstepping
4. M. Babystepping
5. E. Support for an external SD card socket