Posts made by fpex

thanks
I managed to get it connected but the web interface is gone, I get a black page on safari and cannot connect on chrome using the IP I retrieve

How do I remove all the wrong upped networks?

I have upgraded via the SD, since it was a very old firmware. This first M997 S0 and then M997 S1 from pronterface.
The net result is that now the board no longer connects to a WIFI.
I followed the steps as form the guide

M552 S0
M587 S"ssid" P"passed"

But it does not work. It seems that the board makes all I give as ssid/psswd uppercase and of course it does not work.
The AP also iOS no longer working, therefore M552 S1 results in no known networks and no more AP.

If I try to reinstall the firmware, it simply deletes the bin file and claims it is not there.

I am kind of lost. Any help is welcome.
Thanks

Wiring and firmware settings for a kossel with a diamond head. Any info I can use since I haven't found much around

I am now finally, after a couple of years, my kossel with diamond head and duetwifi.
Any pointer to where to start to look at.

I am currently at the wiring stage with the entire frame and alike built and tuned.

Thanks.

Now that i am a big piece forward I am facing a little problem. The two boards are quite large and the way the connectors are done it is impossible to put it in the base of a kossel (except when I give up height and make a much deeper base). The only options I see are either an external box with boards backt to back and push-pull fans in between. Or place them flat (next to each other) in the top of the printer.
For the latter I would need a shorter ribbon cable though.

I think I would reach max 110 if I put the electronics with the screen on top, less otherwise.
Thanks. Once I start wiring … the fun will start (hoping the duet will work )

Thanks, I was considering at the bottom to reduce long cables. With the duet I do not plan to use the SD card (never did on it before) as the wifi web works very well.
Is there a constrain on the length of the axis motor cables? I still need to decide if to place all electronics aside with the supply or on the back axis or on the top. The screen will go then on top in front (or int he worst case suspended on a front axis)

btw mine is a Kossel XL, so it is rather tall

Anybody did designs for placement at the base of a kossel? Would spare e loads of time!

HAs anybody a step file of a diamond hot end mount (kossel better) since mine just broke at the first moment (by hand even)

Now I need to make/find the mounts for my 15x15 profiles

I gave up and took 3 (original) titans.

I will put the extruders on the three vertical beams aligned to three custom spool holders I am designing now. The titan is attractive, but honestly at 45 GBP plus axes without motors … I am somewhat thinking of building/printing a simpler one, despite the very good experience I have from the BigBox titans.

It could be an option, I did have the feeling that it needed to be always at max.
If I do that I would than have one always on for the case and one for light indeed.

BTW if you guys use the diamond, which extruder would you suggest for a kossel+diamond? I do not feel like spending 150 pounds (plus taxes) on three titans like my big box

I plan to use one for two push-pull fans on the electronics and ine for the diamond hot end. Not sure they can sustain also the leds

What is the best pin to connect always on LED to a DuetWiFi+Duetx2?

Thanks!

Thanks. I am starting mounting, but first i needed ti decommission an ormerod2. it was time.
anybody has an idea where I can find editable kossel plastic part files (15x15 extrusions)? I am not impressed by some parts and would love to change them.

I have just started a project ti build a KosselXL with a diamond hot end with DuetWiFi + Duet2X. Any suggestion on what to look for or experience sharing is more than welcome!

Honestly I would not make an expansion board specifically for something, but more like a breakout board with sockets.
Either sockets for drivers or try to go the Mikroe route with a SPI like socket