I thought the Hz could still be set somewhere.
I had misunderstood in the Wiki how it was described there.

Then it is all right.

What and how to set the PID Bed when using a Hotbed 230V (450W) with SSR (Crydom HD4850).

I have set my Bed as follows. Now I ask myself how to set the 10hz?

This is my setting:
M307 H0 A230.7 C729.5 D2.6 S1 B0

Can anyone help me?
Thanks

Thanks for the info! I didn't know this feature yet. Maybe there is a manual for the Panel Due. I must say that I own my board only since last week and I am enthusiastic about it.
I just tested something and changed the jog buttons in the browser.
On the panel only the values of X and Y are taken over. At Z are the 0.5,... steps still available. In the Jog menu under the tab "movement", the buttons work however as already mentioned with Z 0.05 although 0.01 was set.
Seems to be a bug?
The bug is known see also:
https://forum.duet3d.com/topic/9480/paneldue-request-m291-x-y-jogmenue-like-in-webinterface
Sry!

Hi!
This is really a nice thing with the query pops. What I unfortunately find very bad about the jog buttons is the division 0.05 >0.5,... better would be 0.01>0.10,..,

On my PanelDue 7i completely different values are displayed 0.02>0.2,... The buttons don't work.
Firmware 1.22.1(28b1).
In the browser the buttons work as they should.
What is the reason for this?
Is there also a possibility to say in the dialogs go to line,... I have a huge collection of macros, but I only checked a few.

Sorry about my bad English!