Here is the config file.
Using s3d and ho as a retraction setting 2.3mm to 70mm / s.
estrudo pla verbatim at 190 ° and 60mm / s speed.
The printer is an anycubic predator with bondtech / smart effector / rod magnetic / nozzle 0.4mm

config(1).g

pla verbatim extruded at 190 °, speed 60 mm / s hotend e3d v6 nozzle 0.4.   

@droftarts as I said it seems that the linear advance only works in the start of the loop

@droftarts I've already read all the guides but I can't find a solution to my problem!

Hi, I have a problem with linear advance on delta printer with duetwifi. I added the command M572 D0 S0.1 but it seems to be working only in the start loop and not at the end of the loop! can you help me? duetwifi card fw 2.04.