Topics created by gtaman

@dc42 Unfortunately, adding a daemon.g file with a loop didn't fix it for me. I have a music macro called from my S3D ending script. If I run the macro while no job is running it works fine. But almost always, at the end of a print, the third note doesn't sound. Not a big deal, but I don't know why it does this.

@gtaman I don't know anything about Moon's steppers so I can't help you on that one.

As you already found out the Wantai steppers have been mentioned here in several occasions and that's how I got to them. I run them at only 1300mA for X and Y and with my (now no longer used) Anet 12V PSU they were happily throwing X and Y around at 250mm/s.

0_1565034867391_IMG_9479.jpg

Hey! That looks pretty similar to my printer. Mine is the Tatara Hayabusa from thingiverse. I had protocase make it for me since I had a discount for being a student 🙂 I had to relocate my BL touch to the same location you're talking about. I originally started off with the Anet A8, and slowly upgraded everything. the only things left are the stepper motors, rods, and endstops.

I was thinking of getting these, but I'm not sure if they'll work with the duet as I think you'll need removable stepper drivers.

https://spool3d.ca/mks-base-servo42-closed-loop-stepper-motor/

Maybe the duet has it built in? or maybe I just need stronger motors. I'll probably just start a new thread about it

Thanks one last time, I wouldn't have got it done over the weekend if it wasn't for your help lol 🙂