@droftarts thanks so much! I will try DuetPi 
Posts made by guibot
-
RE: Help with first time using Duet3Dposted in Duet Hardware and wiring
-
RE: Help with first time using Duet3Dposted in Duet Hardware and wiring
I see! That explains the black screen
Could you advice on the right image with desktop environment? -
RE: Help with first time using Duet3Dposted in Duet Hardware and wiring
@Phaedrux thanks for helping!
I downloaded the image DuetPi-lite.zipI am not very used to RPI, and I don't know the IP because the screen is black.. but I will try to SSH
-
Help with first time using Duet3Dposted in Duet Hardware and wiring
Hello, I'm very new to the Duet3D.
A friend ask me for help with a custom Duet3D printer, connected to a SBC Raspberry PI 3.The printer was with some CAN errors and since it wasn't used during a while we thought it was a good idea to upgrade to the latest oficial firmware.
We've done backup of the config files and created the OS with the Pi Imager, and now when it reboots, the Duet3D logo appears, and than the screen turns black.If anyone can point me a direction to be able to see the RPI OS image again, it will be very appreciated.