Topics created by Hammad

I found the error... 2 1XD Boards had the same address and it was causing the whole problem. Thanks for the support!

@hammad said in Duet3 Homing failed:

@deckingman The Homing status changed to the coordinates I entered with G92 X100 Y100 Z10. The Touchscreen showed X 100 Y 100 and Z 10. When I try to move the motors using the Touchscreen they don't move at all but the coordinates on the screen change. The wiring isn't the issue. I checked everything and it was built to be normally closed as recommended by the documentation. I'm going to start a new thread to make it easier for everyone to follow. I need to get this to work for a big project. I already ordered many boards for the other printers lol. I'll post a link to the new thread in a bit.

Thanks, that makes more sense. I'll check your new thread.

The 5A fuse is fine. I've checked it before posting the question. Thanks for your help.

@dc42 Thank you very much!