Topics created by Hobsie

@hobsie so far the print quality with these belts has been phenomenal. If they are fake they are good ones. I think the biggest thing I noticed about them is that they are all cut very straight. The other belts seem to have a bit of wander. These are dead straight and they stay centered on the pulleys. They also sound quieter. I'm very pleased.

0_1527542401436_385AB447-A304-4B57-9116-43E658E382E7.jpeg

M501 /facepalm.

Yeah that was missing, and had it been there this whole time the OP issue wouldn't have happened 😛

Massive thanks, pid tuned values loading up from config-override.g correctly now and both H0 and H1 have voltage values in there now as well!

Perfect thanks!