Topics created by HtRabbit

@htrabbit don't unplug the stepper while it's powered. You'll damage the driver. 😳

OK, This is why i like hanging around smart people,

i needed to switch the red and black wires on the Duet 2 connector, and invert the M591 command

;Filament Sensors M591 D0 P2 C"!e0_stop" S1 ;Extruder 1(0) M591 D1 P2 C"!e1_stop" S1 ;Extruder 2(1)

Thank you to all.

this has been resolved.