@droftarts
Me and others who have similar problems can only wait or use other network equipment?

@Veti said in The problem of connecting DuetWiFi to modern routers.:

enable ssh on the router and you can have a look at the wireless config. but i would suspect that tkip is enabled
https://forum.openwrt.org/t/add-support-for-xiaomi-ax1800-wifi-6-router/66911
edit: from the dump in the post
nv_wifi_enc=mixed-psk

Yes, I did it, changed the region to EU.
And I also saw "nv_wifi_enc = mixed-psk"

But that didn't solve the problem.

@Veti The screen with the settings was for the sake of example, as one of attempts to change the name and password.

They were always the same when trying, of course.

I will try to change the region on my router.

@Veti MI Ax1800
I would leave the network open and whitelist, but part of my smart home uses 2.4 and cannot work with a network without encryption.

@Veti I wrote above that without encryption, everything connects perfectly.

And yes, the router is 2 meters line of sight from the printer.

@dc42

@dc42 said in The problem of connecting DuetWiFi to modern routers.:

PS also, does it connect if you set the router to No Encryption? Perhaps the failure has nothing to do with encryption.

When the network is open, there are no connection problems, everything is fine.

But this is not an option to leave the network open for me, I live in a very large house.

@dc42 I tried it with WPA2 and WPA\WPA2 does not connect

@Veti Unfortunately, there are no third-party firmware for it yet

I am a longtime owner of DuetWiFi since version 1.02
And he was always pleased.

But now is the time to update my router.
And then the problems began.

In my new router, there is no way to select the TKIP
There is only a standard set (WPA\WPA2\WPA3 and mixes of it)
I spent 24 hours trying to connect. I have tried various combinations of protocols, network names and passwords, and all have not been successful.

This problem has been troubling the community for many years, why is it still impossible to decide in 2020 that the wonderful DuetWIFi cannot work with modern routers?

M587 S"Bazzz" P"qwe123qwe123"
ok<LF>
M552 S1
ok<LF>WiFi reported error: Timed out while trying to connect to Bazzz<LF>WiFi module is idle<LF>