Best posts made by izeman

@pkos said in Home Assistant Integration:

While waiting, you can easily use this:
https://github.com/iz3man/duet3d/blob/main/duet3d.yaml

Just add the lines to your configuration.yaml, modify for your printer and restart HA.

LOL. Looking for a way to get MQTT running on Duet-Wifi board, find this thread, and then a link to MY github

Btw: This is still using perfectly fine with the latest betafirmware

And I found this github for MQTT integration which gives basically the same info - but haven't tested yet, as I'm waiting for native MQTT support before I start ripping everything apart again.

https://github.com/keyz182/DuetMQTT

@dc42 said in Babystepping and 12864 goes crazy:

There is currently no code to babystep X and Y on a 12864, buy I can add them if you need them.

Babystepping X and Y? What would that be used for? I use babystepping in Z only to adjust the squish for first layer.
I did not write the code I posted. This is the "default" menu system - which beside from babystepping looks great, and does all I need and looks nice.
I think I know start to understand what the code does. I will remove the X and Y stuff und replace the Z stuff by N521. Thank you!

@jay_s_uk Thanks. Yes, that's were I found it as well. Didn't realize that it was moved though, and thought I was using the "old" structure, whereas in fact I was already using the new one

Thanks guys. My goal is to understand how to write code for menu myself, so I digged a little into it, and I will check the other menu examples as well

@jay_s_uk said in "Error: Probe already triggered at ...." based on location??!:

@izeman sounds like a wiring issue then and moving passed a set point pulls a wire

OH MAN! Seems it REALLY IS A WIRING ISSUE. I checked all connectors, measured for short and voltage before. Twice, three times, but it seems the long wire coming from the board is broken somewhere.
I can trigger the PINK 1000 by moving the wire.

THANKS!!