Best posts made by jeffouille

@droftarts
Thanks !
I've just updated the svg : https://drive.google.com/file/d/1mnaXqU4zVAt4ciulPTDM1ZS2i1TMj-y_/view?usp=sharing

Here's the png :

Already done by T3P3 on github. What a job !!!

Less than one minute to do the job.
Thank you !

https://github.com/Duet3D/Duet3-Mainboard-6XD/blob/master/v1.0/Duet3_MB_6XD_v1.0_Wiring_Diagram.svg

@dc42 Thank you for your answer.
As you suggested, I connect directly the nc output on the IO_IN and it is working very well. No need opto-iso indeed for NPN Proximity sensor

Hi everybody,

I am planning to build a CNC pendant according to this documentation : https://docs.duet3d.com/en/User_manual/Connecting_hardware/IO_CNC_Pendant

I will also use the panelDue.

I have made this schematic after reading the readme and the documentation, could you confirm that this is correct ?
I am not sure about the panel due passthrough.... Don't understand really what is in the actual documentation

Thank you for your answer !
Jeff

PS : If you want the svg to complete the documentation and the github. tell me (after correction if needed )