Topics created by laakti

@laakti from the top of the printer, the organisation of the steppers should be as follows

back l Y r e / \ i f X-----Z g t h front t

Please see https://docs.duet3d.com/en/User_manual/Machine_configuration/Configuration_linear_delta for the in depth documentation on setting up a delta and https://docs.duet3d.com/en/User_manual/Tuning/Delta_calibration for the ensuing calibration.

you may want to refer to http://boim.com/DeltaUtil/CalDoc/Calibration.html to understand typical error cases and how they would affect the mesh, to address them.

Bed leveling works fine too.

That solved my problem. Thanks to all for your help.

Tim