Hello,
I was printing a part the other day and I found a printing problem that I have never seen, I tried to change some configs but nothing seems to fix the problem, I just want to know if someone had this problem and can help me with this because I'm getting quite frustrated.
I attach some photos and videos to show my problem.
Thank you all
Im printing now several cones with different angles and these are the results
I'm gonna try this starting G-Code, how do you see it?
M104 S0
G28
M109 S0
G29
M109 S200
@Phaedrux I thought I had to do it with the Duet Config.. interesting
I'm using PrusaSlicer but with a custom printer, and in my initial Gcode in PrusaSlicer is just:
G28
G29
Hello @droftarts, the machine never did it again so I guess it could be a problem with the GCode.
What I wanted to ask is if there is a way to set this on the machine.
Heat Bead -> BLtouch -> Heat Nozzle -> Print
This is because the extruder is making a lot of ozooing while passing the BLtouch and is being an issue
Thanks!
Hello, Im using prusaslicer to slice my stl and I set up 215ºC to print, but I saw that while printing the part, the nozzle temp changes for no reason, suddenly its 220ºC, then 225, then 215, and I don't know why is this happening
