Best posts made by Maut

@dc42 said in Wep Page Disconnections:

@chas2706 said in Wep Page Disconnections:

; Network
M552 P192.168.1.6 ; Configure static IP address.

Are you quite certain that nothing else uses that IP address? Your router might be assigning it to something else via DHCP. I suggest you check your router settings, to make sure that the pool of available DHCP addresses doesn't include 192.168.1.6. If it does, then move the Duet's IP address to be outside that range.

I think it's good practice to set a static IP for the Duet on the router itself.

Hi, I ran a calibration script (modified Marlin linear advance script) for pressure advance and I'm not really sure how to diagnose the results:

Calibration script:
https://pastebin.com/JE75Ya5Y

Config.g:
https://pastebin.com/fPz16j1q

Using Bondtech BMG with Bowden (about 600mm length), Capricorn tube and e3d v6. Retraction distance is 3mm@45mm/s

What am I looking for? What parameters should I play with?

Thanks!