Posts made by minsk

ahhh…got it...thank you sir
wiring up my end stops now

mmmk..
so i have a diff kinda build.
im using 4 motors
18x18 square.

i have is kinda set up as an xy i guess..but not really
i have one motor on x…one motor on y.... 2 motors on zed
2 motors on z because it will be lifting an 18 inch bed
my question is how do i hook the two z motors up to the duet wifi

i did a new config file on reprap and did the cartisean.
now the axis are working properly on ax and y
moving individually
on to drilling holes in my 20x20 bed...this should be fun

oh snap…i think you are right

So upgraded firmware for panel Due and all works now…not a bad cable

so have x and y wired up on my large format printer im building.
when i click to move x 100 mm y moves also…
hmmm

when i click y to move 100 mm x moves also

they are of course wired seperately..all go in to there respective ports on the wifi board etc.

EDIT: ok weird…z is not hooked up and if i click z on the screen x and y move also

any ideas would be a appreciated

my panel Due has a red bar and just says connecting.
cant control motor movement thru lcd

any help is appreciated

thank you

daniel

nope.
thats it .
thank you .

i just didn't know the correct g code.

minskmade

Capt Awesome….the controller for Duet is browser based so you can us i on any device..it works great.

hey guys getting closer and closer to getting my large format printer pooping…have the x-axis all set up...question...i wanna run the x 100mm is there a way to do that...or is there away to do more than 10mm of motion at a time...am i missing something...

is this the one indiana?

any links to any one using deut for cnc?
having mach3 on a 7" duo panel would be amazing

very verry coool…how did you access the style sheet....looks great...im into clean and flat.....that being said...these guys are doing an amazing job on this sw and hw

so as i mentioned in another post ..so impressed with DUETWifi.
Has anyone ever attempted to use this on a CNC build?
Seems lIke the natural progression for this Board/TFT.
I'm in the middle of a 152 c x 152 c cnc build. 4 3amp 425 oz nema 23s
i would def be into beta testing such a product

errr….so what part of the code do i tell the config.g the size of the bed is 500mm x 500 mm

i do have ssr and a sep psu i beliee the board is..umm 40 amps…it will be interesting gettinng it working

i have a sep PSU for my heater bed.

woot.
got the wireless all working great. motors working .
really cool to control it from the android phone.
winner winner chicken dinner.

i just have to figure out out to plug in my bed parameters and height now. im assuming i do that in gonfig.g
has anyone edited the grahics on their screen?

i'm hoping to make a video soon. to be fair the smoothie board i have is the MKS Makerbase 1.3. So the level of quality is not the same. the quality of all your products is def miles ahead of other vendors. my only concern is my 18" print bed..it will be running of a sep psu 40 amps :P. thanks again

so finally got time to start wiring up my 500 x 500 3d printer build.
just started the rudimentary electronics with duet and duet panel
wow what an awesome screen. what nice plug and play ability.
now onto motors. getting the motors popping. so far super satisfied with the easiness compared to smoothie and ramps.
yes, i own and have tested the others…i have to say this may be the cadillac.
the quality of build is superb.

thanx for the attention to details

minskmade.

hmm…this may not be the board for me...i prolly should have gone more plug and play...
oh well its on the way....really not a code hacker

So i have ordered the Duet WIFI and The Duet Panel.
I am doing a large Ultimaker CLone.
the heat bed is 18" x 18"
the frame is 3030 extrusion.

Has any one used the Duet Wifi on a Ultimaker Clone.
Is there away to hack the graphics on the duo panel?
moved buttons etc, change colors…make them more symbolized

MinskMade