Topics created by MurphDurtay

@MurphDurtay said in Printer won't extrude walls of prints.:

Everything seems to be working as usual now with the 0.4mm nozzle. Could I just ratchet up the nozzle temp to like 270 to print with the 0.8 and 1.0mm nozzles?

You can try that, but you may also want to look at https://docs.duet3d.com/en/User_manual/Reference/Gcodes#m309-set-or-report-heater-feedforward.

Figured it out, I'm an idiot.... I was holding metal to the side opposite of the wire when I should have been holding it to the larger side, the one with the crosshairs....

@Phaedrux I do eventually want to use the duet in conjunction with a raspberry pi, but they are hard to find right now and if you can find them they are ridiculously overpriced.