Topics created by NAK_3D

All layers are same color in layer height view.. I've uploaded the latest gcode for the cylinder... error occurred twice at layer 129, and again at 156. Give or take a layer or two, this was the layer currently displayed on the web interface at the time of the error. Maybe this will help narrow it down..

https://www.dropbox.com/s/ietjnm8mnlbussy/430mm cylinder R2.gcode?dl=0

@nak_3d said in Change Z-babystepping to Y-babystepping for Belt printers.:

@dc42 Its a CoreXY design.. I do believe two motors have to run to go a single direction.

That complicates things, if you want the babystepping to work quickly.

I've implemented changes to the M290 command in my latest internal build to allow any axis to be baby stepped. Currently it will only attempt to apply baby stepping to existing moves in the queue for the Z axis. So Y baby stepping will work on a CoreXY machine, but you will need to wait for existing moves in the queue to complete before it takes effect.