Topics created by oribotic

@droftarts ok it works amazingly!

just got homing working nicely, I home U, home V and then home Z
U & Z share the same probe and V has an additional probe.

One thing though, I don't understand the reason behind hiding the U and V axes.

Because during a tool change for tool 0

; tool 0 pre change script G1 H2 U0 F6000 ; put u in zero position G1 H2 V5 F6000 ; lift V out of the way

and then tool change for tool 1

; tool 1 pre change script G1 H2 V0 F6000 ; put V in zero position G1 H2 U5 F6000 ; lift U out of the way

As long as the U & V are homed correctly, when either of the U or V axes are at 0, they are at on the current z value.

anyway, about to to test some prints

thanks so much for your quick assistance.

Is the ZIDEX printer your project? A great project, lots of work and very handy source of information on independent Z axes!

@oribotic if the error follows the motor that would definitely indicate a wiring issue